U.k. modem compliance information – eMachines Notebooks User Manual

Page 75

Advertising
background image

getting started

78

U.K. Modem Compliance Information

This modem is approved by the secretary of state at the Department of Trade
and Industry for connection to a single exchange line of the public switched

telephone network run by certain licensed public telecommunication operators

or system connected thereto (direct exchange lines only, not shared service or
1-1 carrier systems).

This modem is also suitable for connection to Private Automatic Branch

Exchange (PBX), which return secondary proceeding indication.

If this modem is to be used with a PBX which has extension wiring owned by BT,

connection of the modem to the PBX can only be carried out by BT; or by the

authorized maintainer of the PBX unless the authorized maintainer has been
given 14 days written notice that the connection is to be made by another

person; and that period of notification has expired.

This modem is suitable for use only on telephone lines proved with Loop
disconnect or Multi-Frequency Dialing Facilities.

Users of this modem are advised that the approval is for connection to the PSTN

via the telephone line interface supplied with it. Connection of a modem to the
PSTN by any other means will invalidate the approval.

There is no guarantee of correct working in all circumstances. Any difficulties

should be referred to your supplier.

Some network operators require that intended users of their network request

permission to connect and for the installation of an appropriate socket.

The Ringer Equivalence Number (REN) of this modem is 1. REN is a guide to the
maximum number of apparatuses that can simultaneously be connected to

one telephone line. The REN values of all apparatuses are added together, and
should not exceed 4. Unless otherwise marked, a telephone is assumed to have

a REN of 1.

AACR53700001K4.book Page 78 Friday, September 5, 2003 1:52 PM

Advertising