Before first use, 1 initial cleaning, 2 setting and changing the time – Electrolux EBGL70 User Manual
Page 7: Changing the time of day

Core temperature sensor
To measure how far the food is cooked.
Glass dish with 2 grill inserts
Sponge
For absorbing residual water from the
steam generator.
4. BEFORE FIRST USE
WARNING!
Refer to the Safety chapters.
4.1 Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and Clean-
ing".
4.2 Setting and changing the
time
After the first connection to the mains, all
symbols in the display are on for some
seconds. For the subsequent few sec-
onds the display shows the software ver-
sion.
After the software version goes off, the
display shows h and 12:00.
Setting the time of day:
1.
Touch
or
to set hours.
2.
Touch
.
3.
Touch
or
to set minutes.
4.
Touch
or
.
The Temperature / Time display shows
the new time.
Changing the time of day
You can change the time of day only if the
appliance is off. Touch
.
flashes in
the display. To set new time of day use
the above procedure.
ENGLISH
7