EXP Computer ThinConnect4 - Manual (Page 109)

ThinConnect4 <99>
Firewall Factory default setting
The following items are the ThinConnect4 Firewall default setting.
•
Interdict automatic connection of circuit by ICMP.
•
Shut out to supply NetBIOS Services to other networks from LAN port.
( Interdict automatic connection of circuit by Windows startup and finish)
•
Interdict automatic connection of circuit beside TCP connection (SYN) flag.
( Interdict automatic connection of circuit by the end of application)
•
Interdict automatic connection of circuit by BOOTP, TFTP.
•
Interdict automatic connection of circuit by Apple Talk.
Note: The above 5 items is applicable to use on the same LAN.
Caution: If you change or delete the default value of any items mentioned above, the
Firewall will become ineffective. This may cause user unable to use dial-up
function, or to make connection with dial-up. Try to correct the setting or set
IP filter to the default value.
Click the “Return to Default” button to reset all the “Firewall - IP Filter Table” to
return to the default value.
• Listing for filter setting proceed to the next page.
• To Editing for filter setting proceed to page 105.
• To Removing for filter setting proceed to page 106.