EXP Computer ThinConnect4 - Manual (Page 31)

ThinConnect4 <21>
3.1 Install ThinConnect4 Setup Utility
The ThinConnect4 Setup is a utility program helps user configure ThinConnect4’s variety
of functions. Before you start installing the utility, see notes below:
•
ThinConnect4 utility is on the Installation floppy disk, to install the program requires
a floppy disk drive.
•
ThinConnect4 utility can only be run under Windows 95/98 or Windows NT.
However, after ThinConnect4 has been properly configured, most Internet functions
are possible from most of OS.
•
Do not use “Resume” function on your PC (especially notebook PC) under
Windows NT 4.0.
3.1.1 Installation
1. Double-click on “Control Panel” icon in “My Computer”.
2. Double-click on “Add/Remove Programs” icon.