Epson VIGOR 3300 - Manual (Page 31)

Vigor3300 Series User’s Guide 27
3 3 . . 1 1 . . 3 3 S S y y s s l l o o g g
The Vigor3300 Series supports a Syslog function to keep a record of abnormal conditions. The
router will send Syslog packets to a Syslog server on the remote site. The administrator can
observe any abnormal events from Vigor3300. In the System group, click the Syslog option.
The Syslog web page is shown below:
Status Click Enable to activate this function. The router will send system
log message for your reference. If you click Disable, the router will
not send out any message about system log.
Syslog Server IP The IP address of the Syslog server. If a user assigns an IP address
of “0.0.0.0”, the Syslog function will be disabled. Then, Vigor3300
will not send Syslog packets to the Syslog server.
Syslog Server Port Assign a port for the Syslog protocol.
Apply Click Apply to save these settings.