Introduction, Section 3, Installing and configuring the print server – Epson 1440 User Manual
Page 23
Section 3: Installing and Configuring the Print Server
AXIS 1440 User’s Manual
13
Section 3 Installing and Configuring the
Print Server
Introduction
This section is divided into five parts:
•
Hardware Installation explains how to connect the AXIS 1440 to
your printer and to the network.
•
Installation and Setup Overview provides an overview of the
installation and setup process.
•
Software Installation explains how to install the Axis utilities.
•
Configuring the Print Server Using AXIS NetPilot explains how to
set up the AXIS 1440 for your network using AXIS NetPilot, the
recommended management and configuration tool for NetWare
networks.
•
Configuring the Print Server for TCP/IP provides instructions for
assigning an Internet address to the print server using DHCP,
ARP, RARP, and BOOTP.