Epson 1440 - Manual (Page 89)

Appendix A: The Test Button
AXIS 1440 User’s Manual 79
Appendix A The Test Button
The test button, located on the side of the AXIS 1440, is used for the
following:
• Printing a test page to check the connection to the printer.
• Printing the parameter list showing the AXIS 1440 settings.
• Resetting the AXIS 1440 parameters to the factory default
settings.
Printing a Test Page After you connect your printer to the AXIS 1440, press the test button
once to print a test page. If the test page prints, the parallel interface is
functioning correctly.
Printing a
Parameter List
Press the test button twice to print a parameter list showing the
current AXIS 1440 settings. You can use AXIS NetPilot or the
internal web server to change these settings.