Eicon Networks 1550 User Manual
Eicon Networks Hardware
Advertising
Table of contents
Document Outline
- Contents
- Introduction
- Setup
- System Requirements
- Step 1: Connect the Cables
- Step 2: Log in to the Eicon 1550/1551
- Step 3: Select the VHSI Protocol
- Step 4: Create Profiles
- Step 5: Modify Other Settings
- Step 6: Reset the Device and Test WAN Access
- Creating a Backup Profile
- ISDN Port Setup
- LAN Setup
- Changing TCP/IP Settings to DHCP
- Technical Support
- Using your Eicon1550/1551
- Security
- Web Interface Settings Glossary
- System Menu
- Connection Menu
- Connection Menu > Connection Group (PPP)
- Connection Menu > Connection Group (X.25)
- Connection Menu > Connection Group (Frame Relay)
- Connection Menu > IP Group
- Connection Menu > RIP Group
- Connection Menu > Authentication Group (PPP)
- Connection Menu > DNS Group
- Connection Menu > Callback (Eicon 1551 only)
- IP Menu
- Routes Menu (IP Tree)
- Filters Menu (IP Tree)
- NAT Mapping Menu (IP Tree)
- Time Client Menu (IP Tree)
- SNMP Menu (IP Tree)
- DHCP Menu (IP Tree)
- LAN Menu
- LAN Menu > RIP Group
- LAN Menu > DNS Group
- VHSI Port Menu
- VHSI Port Menu > Delays Group
- Protocol Menu (VHSI Tree) (X.25)
- Protocol Menu (VHSI Tree) > Virtual Circuits Group (X.25)
- Protocol Menu (VHSI Tree) > Timers Group (X.25)
- HDLC Menu (VHSI Tree) (X.25)
- HDLC Menu (VHSI Tree) > X.32 Services Group (X.25)
- HDLC Menu (VHSI Tree) > Timers Group (X.25)
- Protocol Menu (VHSI Tree) (Frame Relay)
- Protocol Menu (VHSI Tree) > Dynamic DLCI Group (Frame Relay)
- Static DLCI Menu (VHSI Tree) (Frame Relay)
- Dialer Menu (VHSI Tree) > Direct Dialer
- Dialer Menu (VHSI Tree) > Hayes AT Dialer
- Dialer Menu (VHSI Tree) V.25bis
- ISDN Port Menu (Eicon 1551 only)
- ISDN Menu > Protocols
- ISDN Menu > Call Thresholds
- ISDN Menu > Incoming Calls
- ISDN Menu > ISDN Access Parameters
- Selecting an Interface Cable
- Configuration Worksheets
- Regulatory and Warranty Information