Maintenance information, How to identify parts of vacuum cleaner – Eureka 4710 Series User Manual

Page 4

Advertising
background image

Maintenance Information

Maintenance schedule is also located on back side of dust cup.

2

Eureka Customer Service HELPLINE 1-800-282-2886

www.eureka.com

!

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.

Moving parts! Assemble the vacuum cleaner before using.

How to Identify Parts of Vacuum Cleaner

EXT-U Belt

Brush Roll

Handle with

Power Paw

®

Handle

Hose

Dust cup latch

Lower

cord

retainer

Nested crevice
tool & extension
wand

Power switch
Handle release

Belt view window

Filter screen & filter

Dust cup

Headlight

(on some models)

Height adjustment knob

Brush roll cover

Upper cord
retainer

Hose hook
Power cord

Dusting brush

Carrying handle
& cord wrap

Hose connector

Lower cord wrap

Hose retainer

Screen

Filter

DCF 4/18

SPECIAL FEATURES

Available on some models

Duster

chamber

Self-cleaning

duster

DUST CUP – Empty after each use

FILTER DCF 4/18 – Replace within 6 months

FILTER & SCREEN – Check regularly, clean as needed

Close bottom lid

until it clicks.

Pull up latch and

remove dust cup.

Twist dust cup cover

counter-clockwise.

Grasp filter;

turn clockwise.

Remove screen and

rinse. Dry thoroughly.

Shake dust off filter.

Rinse; dry thoroughly.

Place screen

over filter.

Align 3 tabs with cover;
turn counter-clockwise.

Remove filter.

Place screen over

new filter and install.

Line up cover

and lock.

Lift lever to release

bottom lid. Debris will empty.

BRUSH ROLL – Clean monthly

EXT-U BELT – Replace worn, cut or out of shape belt

Advertising