Edirol PC-50 - Manual (Page 19)

19
Getting Connected and Installing Drivers (Windows)
1
Disconnect all USB cables except for a USB keyboard and USB mouse (if
used).
2
Open the System Properties dialog box.
1. Click the Windows Start menu, and from the menu that appears, select
Settings | Control Panel .
2. In Control Panel , double-click the System icon.
fig.05-2_30
3
Click the Hardware tab, and then
click [Driver Signing] .
The Driver Signing Options
dialog box will appear.
4
Make sure that “File signature verification” is set to “Ignore.”
If it is set to “Ignore,” simply click [OK] .
If it is not set to “Ignore,” make a note of the current setting (“Warn” or
“Block”). Then change the setting to “Ignore” and click [OK] .
5
Click [OK] to close the System Properties dialog box.
6
Exit all currently running software.
Also close any open windows. If you are using virus checking or similar
software, be sure to exit it as well.
7
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
8
Click the Windows Start menu. From the menu that appears, select “Run...”
The “Run...” dialog box will appear.
Windows 2000 users
Log on to Windows as a
user with administrative
privileges (such as
Administrator).
If you changed “File
signature verification,”
you must restore the
previous setting after you
have installed the driver.
(
→“If you changed “File
signature verification””
(p. 21))
PC-50_e.book 19 ページ ２００５年１１月１０日 木曜日 午前１０時３３分