Emerson Radio CKD1100 - Manual (Page 16)

15
Programmed Playback
The CD player in this unit has a 20 track programmable memory which allows you
to program any disc to play just the tracks you want to hear in the exact order that
you want to hear them. You may program a track or tracks to play more than once
if desired.
NOTE: Programming can only be done while the player is in the Stop mode. If
a disc is playing press the STOP button to stop playback before performing
the programming steps below.
1.) Turn the unit ‘On’, press the CD PLAY/PAUSE button to select CD function
and load the desired disc in the player.
Wait until the player reads the disc and
the display shows the total track number.
2.) Press the CLK.ADJ/PROG. button.
The AM/PROG. indicator and the
Program Number “0 1” flash in the
display, indicating that you can select the
first track to be programmed.
3.) Press the or buttons to select ct
the first track. The desired track number
appears on the display.
Example: Track “7”.
4.) Press the CLK.ADJ/PROG. button again.
The selected track is entered in Program
memory number 01 and the display
advances to “0 2” indicating that you can
select the next track to be programmed.
5.) Repeat Steps 3 and 4 to program up to 20 tracks in the memory.
CKD1100_052107.p65 21/5/2007, 10:44 15