Epson B813152 - Manual (Page 3)

Using Optional Equipment Page 27
Removing the Shipping Screw
To prevent damage during shipping, a shipping screw is attached to the
TPU to secure its lamp assembly. You must remove this screw before
using the TPU.
1 Turn the TPU so the glass side faces up.
2 Use a Phillips head (cross head) screwdriver to remove the shipping
screw from the hole labeled CLAMP, as shown below.
3 Install the screw in the storage hole labeled STOCK.
You may damage the
TPU if you try to use it
without removing the
screw from the hole
labeled CLAMP.