Electrolux C75301K - Manual (Page 23)

Operating Instructions
59
3 If during the automatic warm up function you select a higher setting,
eg. from
# to %, the warm up time is adjusted to match. If you select
a lower setting, the warm up time ends at once.
2 If you start cooking again on a cooking zone that is still warm, the au-
tomatic warm up function uses the residual heat. This saves time and
energy.
3 If you again wish to switch on a cooking zone on which hot items are
already standing, you should always select the required heat setting
with the
- sensor field. In this way you can avoid making the food
boil over as a result of the extra burst of heat from the automatic warm
up.
Cooking without the Automatic Warm up Function
If you wish to use the cooking zone without automatic warm up, select
the required heat setting with the
- sensor field.
1. Switch on the appliance and select the desired cooking zone using the
cooking zone selection buttons.
2. Touch sensor field
- to select the required heat setting from ) to !.
3 You can adjust the heat setting at any time using the
+ and - but-
tons, providing the cooking zone has been selected.
Switching off a cooking zone
1. Select the desired cooking zone using the cooking zone buttons.
2. Press the
+ and - buttons simultaneously to switch off.
1 When the rings are still hot cooking should be carried out without au-
tomatic warm up.