Kichler 300124 - Manual (Page 6)

5
Fig. 6
6. MAKE THE ELECTRIC CONNECTIONS
WARNING: To avoid possible electrical shock,
be sure you have turned off the power at the
main circuit panel.
Follow the steps below to connect the fan to
your household wiring. Use the wire
connecting nuts suppled with your fan. Secure
the connectors with electrical tape. Make sure
there are no loose wire strands or
connections.
Step 1. Connect the fan supply (black) wire
and light supply (blue) wire to the black
household supply wire as shown in Figure 6.
Step 2. Connect the neutral fan (white) wire to
the neutral household (white) wire.
Step 3. Connect the fan ground wire (green) to
the household ground wire.
Step 4. After connecting the wires, spread
them apart so that the green and white wires
are on one side of the outlet box and the black
and the blue wires are on the other side.
Step 5. Turn the connecting nuts upward and
push the wiring into the outlet box.
WARNING: TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK OR OTHER
PERSONAL INJURY, MOUNT YOUR
CEILING FAN ON A OUTLET BOX OR
SUPPORTING SYSTEM MARKED
"ACCEPTABLE FOR FAN SUPPORT".
BLUE
BLK
BLK
GRN
Wiring
box
Ground to
mounting
bracket
or downrod
BLUE
BLUE
FAN
LIGHT
Power lines 220~240V
Green ground
RED
RED
BLK
BLK