Eureka 200 Series - Manual (Page 5)

HOW TO ASSEMBLE
NOTE: Assemble completely before using.
Remove and identify parts to be assembled.
Connect Handle
1. Hold handle tube with flat side up,
handgrip curved toward the back.
Attach Floor Nozzle
3. Place floor nozzle into lower end of
cleaner
4. Give a slight twist to secure.
5. Align arrows.
Cord Retainer
6. Secure electrical cord into cord
retainer on handle. Cord stays in
retainer unless handle is taken off.
Wrap Cord
7. Wrap cord loosely around upper and
lower cord hooks.
8. Secure plug to cord to prevent
unwrapping.
Store Cleaner
9. Cleaner may hang by handle or store
on a shelf.
If needed, remove the handle to conserve
storage space. Remove cord from cord
retainer to remove handle.
Floor Nozzle
Style varies by model.
. . . . .
. . . . .
Cleaner
Handle
Cord
Retainer
Cord Hook
Cord Hook
2. Push handle into top of housing until
the button snaps into place.
5