Emerson Process Management Micro Motion 3500 Transmitter - Manual (Page 2)

1
BEFORE YOU BEGIN
This quick reference guide explains basic installation guidelines for
mounting the Micro Motion
® Model 3300/3500 applications platform in a
19-inch (486,2 mm) rack.
For information on I.S. applications, refer to Micro Motion ATEX, UL,
or CSA installation instructions.
For complete instructions about configuration, maintenance, and service,
refer to the instruction manual shipped with the transmitter.
WARNING
Improper installation in a hazardous area can cause
an explosion.
For information about hazardous applications, refer to
Micro Motion ATEX, UL, or CSA installation instructions,
shipped with the transmitter or available from the Micro
Motion web site.
WARNING
Hazardous voltage can cause severe injury or death.
Install transmitter and complete all wiring before
supplying power.
CAUTION
Improper installation could cause measurement error
or flowmeter failure.
Follow all instructions to ensure transmitter will operate
correctly.
©2003, Micro Motion, Inc. All rights reserved. Micro Motion is a registered trademark of Micro Motion, Inc. The Micro
Motion and Emerson logos are trademarks of Emerson Electric Co. All other trademarks are property of their respective
owners.