Specifications, Model numbers systems, Model numbers – Exmark Phazer PHZ19KA343 User Manual

Page 13: Systems

Advertising
background image

Specifications

Specifications

Model Numbers

Serial Nos: 790,000 and Higher

PHZ19KA343; PHZ19KA343CA

Systems

Engine

Engine Specifications: See your Engine Owner’s
Manual

RPM: Full Speed: 3750 ±100 RPM (No Load)
Idle: 1400 RPM

Fuel System

Capacity: 7.7 gal. (29.1 L)

Type of Fuel: Regular unleaded gasoline, 87
octane or higher.

Fuel Filter: In-line Kawasaki P/N 49019–7001

Fuel Shut-Off Valve: 1/4 turn increments (“ON”,
“OFF”)

Electrical System

Charging System: Flywheel Alternator

Charging Capacity: 13 amps

Battery Type: BCI Group U1

Battery Voltage: 12 Volt

Polarity: Negative Ground

Fuses: Two 20 amp blade type

Safety Interlock System

PTO must be disengaged, brake engaged, and
motion control levers out (neutral lock) to start
engine. (It is not necessary for the operator to be
in the seat to start the engine.)

Operator must be in seat when PTO is engaged,
brake is disengaged, or motion control levers are
moved in or engine will stop.

Engine will stop if either the left, the right, or
both levers are moved from neutral lock position
while brake is engaged.

Operator Controls

Steering and Motion Control:

Note: Motion control levers are adjustable to
two heights.

– Separate levers, on each side of the console,

control speed and direction of travel of the
respective drive wheels.

– Steering is controlled by varying the position

of the levers relative to each other.

– Moving motion control levers outward (in

slots) locks the drive system in neutral.

PTO Engagement Switch: Engages electric clutch
(to drive belt) which engages mower blades.

Parking Brake Lever: Engages parking brake.

Deck Height Adjustment Lever: Sets cutting
height to desired position.

Deck Lift Assist Lever: Foot pedal that assists
in raising the deck.

Seat

Type: Standard seat with high back, foam padded,
(internal suspension) and armrests.

Mounting: Hinged to tilt up for access to battery
and other components. Held in tilted position
with lanyard. Adjustable fore and aft seat track.

Armrests: Standard–foam padded flip-up
armrests.

Seat Safety Switch: Incorporated into the
Safety Interlock System. Time delay seat switch
eliminates rough ground cut-outs.

Hydrostatic Ground Drive System

Hydrostatic Drive: Two Hydro Gear ZT2800
Integrated drive systems.

Hydraulic Oil Type: Use Exmark Premium Hydro
Oil.

13

Advertising
This manual is related to the following products: