Crivit CEB 1400 A1 - Manual (Page 50)

46 CEB 1400 A1
GB
Charging the battery pack
The battery packs are charged via the supplied power adap-
ter . For safe and faultless operation of the appliance with the
electrical connection, observe the following instructions:
IMPORTANT
► Before connecting the appliance, compare the connection
data (voltage and frequency) on the rating plate with that of
your mains power supply. This data must be compatible to
avoid possible damage to the device.
► Ensure that the mains power cable is not damaged and that
it has not been laid over hot surfaces and / or sharp edges.
► Ensure that the mains power cable is not overtaut or kinked.
► Do not let the power cable hang over edges (trip wire eff ect).
♦ Plug the power adapter into a mains power socket. Ensure
that the battery packs are switched off (function indicators
do not glow).
♦ Connect the connector plugs of the power adapter with
the connection sockets of the battery packs . The function
indicators glow red and the battery packs are being
charged. The optimum charging time is a minimum of 6.5 hours
and a maximum of 8 hours.
♦ The battery packs are fully charged when the function
indicators glow green.
NOTE
► Frequent overcharging of the battery packs (over
8 hours) results in a reduction of both effi ciency and
service lifetime.
► During extended storage (e.g. over the summer) the battery
packs
should be fully discharged every 2 months and
then recharged.
IB_100082_CEB1400A1_LB1.indb 46 IB_100082_CEB1400A1_LB1.indb 46 20.06.14 10:38 20.06.14 10:38