Crivit 1-LD3875 - Manual (Page 41)

- 79 -
The watch has 7 modes of operation
Press MODE to select the mode of operation of the watch.
The order of the modes is:
Additionally, each mode of operation has several sub-features.
The sub-features can always be reached by pressing SEL.
Time (ZEIt/TIME)
Press MODE to select time mode (ZEIt-1/TIME-1). Press SEL to select the sub-
features of the time mode.
Time, day of the week and seconds <-> time and date.
Press and hold SEL to switch to the second time zone (ZEIt 2 / TIME-2).
- 80 -
Time setting
Press and hold SET. The 12/24 hour time mode indicator will appear. Select the
preferred mode and confirm your selection by pressing SET. Now set the hours,
minutes and seconds by pressing SEL to set each value and pressing SET to
confirm each setting. Now set the year, month and day in the same way and
confirm the setting with SET. Time zone 1 and time zone 2 may be set in the same
way.
Alarm (ALARM)
Repeatedly press MODE to select alarm mode (ALARM). Press SEL to activate or
deactivate the alarm. If the alarm is activated, the alarm symbol
will appear.
Press and hold SET to enter setting mode. The hours of the alarm time will blink on
the display.
Press SEL to set the hours and confirm your setting by pressing SET. Set the minutes
in the same way.
Press any button when the alarm sounds to stop the alarm.
If no button is pressed, the alarm will sound for about 60 seconds and restart after
5 minutes.
Stopwatch (St-UHR/CHRONO)
Repeatedly press MODE to select the stop watch (ST-UHR/CHRONO).