Enterasys Networks 6H302-48 - Manual (Page 51)

Mode Switch Bank Settings and Options B-1
B
Mode Switch Bank Settings and Options
This appendix covers the following items:
• Required tools ( Section B.1 )
• Locations, functions, and settings for the mode switches ( Section B.2 )
• Upgrading the FLASH ( Section B.3 )
B.1 REQUIRED TOOLS
Use the following tools to perform the procedures provided in this appendix:
• Antistatic wrist strap
• Phillips screwdriver
CAUTION: An antistatic wrist strap is required (provided with the module) to perform
the procedures in this appendix. Use the antistatic wrist strap when performing any of
the procedures in this appendix to minimize ESD damage to the devices involved.