Epson STYLUS RX500 - Manual (Page 20)

20 Copying
Placing a Document on the Document Table
Note:
Keep the document table clean.
1. Open the document cover. Place the original document facing
down on the document table. Make sure that the document is
properly aligned.
c
Caution:
Never open the document cover beyond its limit by intention.
Note:
❏ Make sure the document is flat against the glass surface; otherwise
the image becomes out of focus.
❏ An area of up to 2.5 mm from the edge of the document table glass
cannot be scanned.
2.5 mm (max.)
2.5 mm (max.)