Crivit Z31953 - Manual (Page 14)

14 GB/MT
seams start to stretch. Otherwise the material might
tear. Only use manual pumps and / or pumps specifi-
cally designed for use with inflatable plastic products.
j Roll the product out first and then check for
holes, tears and other damage (see Fig. A).
j Turn the end cap 1 of the valve opening 2
anti-clockwise off the air valve in order to open it.
j Take the end cap 4 off the valve opening 5
in order to open the valve 6 .
j Pump the product up.
IMPORTANT! Keep in mind that air tempera-
ture and weather conditions can affect the air
pressure inside inflatable products. In cold
weather the product behaves as if it has less air
pressure in it because the air inside contracts.
Under these conditions you may have to add
air. In hot weather the air inside expands. Un-
der these conditions you may have to remove
air in order to avoid overfilling.
j Turn the end cap 1 of the valve opening 2
clockwise onto the air valve to close it.
j Place the end cap 4 onto the valve opening
5 in order to close the valve 6 .
Deflating the product
j Turn the stopper 3 anti-clockwise to open the
air valve.
j Pull the end cap 4 off the valve opening 5
in order to open the valve 6 .
j Press the sides of the air valve 6 together using
your thumb and index finger.
j Allow the air to escape completely.
j Slowly fold the product together (see Fig. A).
Note: Make sure that the product is completely
dry before folding it together.
Cleaning and Maintenance
J On no account should you use corrosive or
scouring detergents.
j Use a slightly damp, lint-free cloth to clean the
product.
Change the water of paddling pools frequently
(particularly in hot weather) or when noticeably
contaminated.
Storage instruction
j Make sure that the product is completely dry
both inside and out when wishing to store it for
any length of time. Otherwise mildew and
mould may form.
j Store the product in a dark, dry place – out of
reach of children.
j The ideal storage temperature is 10 - 20 ° C.
j Ensure that the product does not come into
contact with sharp objects during storage.
Disposal
The packaging is made entirely of recycla-
ble materials, which you may dispose of
at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
Warranty
The device has been manufactured to strict quality
guidelines and meticulously examined before deliv-
ery. In the event of product defects you have legal
rights against the retailer of this product. Your legal
rights are not limited in any way by our warranty
detailed below.
The warranty for this device is 3 years from the date
of purchase. Should this device show any fault in
materials or manufacture within three years from
the date of purchase, we will repair or replace it -
at our choice - free of charge to you.
The warranty period begins on the date of purchase.
Please keep the original sales receipt in a safe
location. This document is required as your proof of
55920_Planschbecken_Content_LB5.indd 14 28.11.13 08:45