Florabest Z29544 - Manual (Page 40)

40 GB/MT
Q
Assembly
j
Make sure that you mount the product in a place where it is
exposed to the sun.
nOtE: You will need a drill for the assembly work.
cAUtIOn! rISK OF InjUrY! Consult the directions for
use that came with your drill.
J cAUtIOn! WAtEr DAMAGE! Before drilling, ensure that
there are no water pipes where you intend to drill.
J Examine the wall before installation and choose suitable in-
stallation fixings. We have supplied fixings suitable for an or-
dinary solid masonry wall.
j
Screw the lamp 7 onto the base 8 (see Fig. A).
j
Screw the nuts 6 anticlockwise off the base 8 (see Fig. C).
j
Hold the back 3 up against the wall in order to work out the
right height for mounting it onto the wall. You may need to use
a spirit level to help you.
j
Mark the boreholes with a pencil.
j
Use a drill to bore both holes into the wall with the aid of a
6 mm drill.
j
Place the dowels 5 into the boreholes.
j
From the back, place the screws 4 into the holes designated
for them in the back 3 .
j
Mount the back 3 onto the wall by turning the screws 2
into the dowels 5 .
j
Place the base 8 onto the back 3 in such a way that the
screws 4 can also be put through the base.
j
Screw the nuts 6 onto the screws 4 in order to fix the base 8 .