Florabest FHE 550 A1 - Manual (Page 58)

58
MT GB
Spare parts
The following spares are available from
Grizzly Service-Center (see P. 81 for the
address). Please indicate the machine type
and the number of the spare part with your
order.
Saw chain .................................3009 1400
Chain bar ..................................3010 0100
Bio chain oil 1 liter ....................3023 0001
Bio chain oil 5 liter ....................3023 0002
If further spare parts should be necessary,
please find the part number on the exploded
drawings.
Technical Data
High pruning saw ................ FHE 550 A1
Rated input voltage..............230V~, 50 Hz
Input power ..................................... 550 W
Safety class ......................................... II
Chain speed ................................10,8 m/s
Weight (without guide rail and chain)
.........................................................4,1 kg
Weight (with guide rail and chain) ...4,6 kg
Oiltank ............................................70 cm 3
Chain ............................Oregon 91 P040X
Chain pitch............................3/8“ (9,5 mm)
Chain bar ....10“ Oregon OE 100SDEA041
Number of chain drive links......................40
Chain width ....................................1,3 mm
Teeth of the sprocket chain wheel ...........6
Sawing length (max.) ....................260 mm
Guaranteed sound power level
................................................104,0 dB(A)
Measured sound power level (L
WA
)
.......................102,2 dB(A); K
wA
=1,5 dB(A)
Acoustic pressure level (L
pA
)
............................. 88 dB(A);K
pA
=1,5 dB(A)
Vibration (ISO 7505) . 3,0 m/s 2 ; K=2,5 m/s 2
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.