Maintenance instructions, Mt gb – Florabest FGPS 1100 B2 User Manual

Page 19

Advertising
background image

19

MT

GB

• Check the proper status of the

electrical plug socket and make

sure that the plug socket is suf-

ficiently fused (at least 10 A). In-

sert the pump plug into the plug

socket and the pump is ready for

operation.

• Make sure that moisture or water

never come in contact with the

mains connection.

There is a risk of electrocution.

The appliance is not suitable for

direct connection to the drinking
water supply system.

Starting the unit

• Control the suction hose. The end of

the suction hose must be placed in wa-

ter.

• Control the pressure hose. The end of

the pressure hose must be in outlet po-

sition.

• Switch on the garden pump with the

ON / OFF switch

(

A

5).

Overload protection:

In the

event of overload the equipment
automatically switches off. To re-
start, allow the equipment to cool
then switch it back on.

Maintenance

Instructions

Clean and maintain your equipment regu-

larly. This will guarantee its performance

and long durability.

Ask our service centre to carry out

any work that is not described in

these instructions. Use only original

parts.

Pull out the power plug before every

maintenance operation. There is a risk

of electrocution or of injury from mov-

ing parts.

Never direct the water jet

against the appliance, nor

clean the appliance under

flowing water. This could

give rise to the danger of

electric shock and damage

the appliance!

General cleaning instructions

A reduction in pump feed output may be

indicative of a blockage. In case the unit

clogs up, remove the suction and pressure

hoses. Flush water through the threaded

hole on the pump in order to remove the

foreign body.

Always keep the appliance clean. Do
not use any detergents or solvents.

• Keep clean the engine rips and motor

housing. Use a damp cloth or a brush.

Always keep the ventilation slots
clean and free.

Only clean the appliance with a soft
brush or a slightly moist cloth.

Any measures above and beyond these,

particularly opening the equipment, are

to be carried out by an electrician. In the

case of repairs, always contact our service

centre.

Storage

• Keep the equipment clean, dry and out

of the reach of children.

• With a rinse of water, remove fluff and

fibrous particles which are possibly
present in the pump casing

Advertising