Electrolux Euromac S42 - Manual (Page 9)

ENGLISH - 7
Engine will not start Engine runs badly The chainsaw runs Engine runs badly or
but does not cut well looses power when cutting
Check STOP switch
is in the position I.
•
Control fuel level
min. 25% tank capacity.
• •
Check air filter is clean.
• •
Remove spark plug,
dry it, clean it and adjust it,
and replace it, if necessary.
• •
Control and adjust
the carburetor screws if necessary.
• •
Change fuel filter.
Contact your dealer.
•
Carefully follow the chain
assembly instructions.
•
Check chain is sharp.
Otherwise, contact your dealer.
•
Fault finding table
Engine still gives trouble: contact your dealer.