Melinera Z31602-BS - Manual (Page 4)

4 GB/IE
LED light decoration
Introduction
Intended use
This product is suitable for indoors and outdoor use
as decorative lighting. The appliance is only intended
for use in private households, and not intended for
commercial use.
Description of parts
1 Connecting straps
2 Mains plug
3 Suction cups
4 Cable ties
5 Suspension eye
Technical data
Operating voltage: 230-240 V∼, 50 Hz,
approx. 22.5 W
Ambient temperature: from -15 °C to +25 °C
Protection class:
IP class:
IP44 (spray water protected)
Bulbs: 240 x 3 V , 0.06 W
The LEDs are not replaceable.
Safety information
DANGER OF
DEATH AND ACCIDENTS FOR
TODDLERS AND CHILDREN!
Never leave children unsupervised with the
packaging material. The packaging material
represents a danger of suffocation. Children
frequently underestimate the dangers. Please
keep children away from the device at all times.
This appliance can be used by children aged
from 8 years and above and persons with re-
duced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction con-
cerning use of the appliance in a safe way and
understand the hazards involved. Children
shall not play with the appliance. Cleaning
and user maintenance shall not be made by
children without supervision.
Avoid the danger of
death from electric shock!
Before use, ensure that the mains voltage
available is the same as the required operating
voltage for the device (230–240 V∼).
This product is intended for use outdoors but
should be plugged into a socket which is
located in an indoor location (e.g. a shed,
garage or porch).
Before connecting to the mains, always check
the product for any damage.
Never use the product if you find damage of
any kind.
The connecting cable cannot be repaired! If the
cable is damaged, the product must be taken
out of use and disposed of in the proper way.
This product does not contain any parts which
can be serviced by the user. The bulbs cannot
be replaced.
Never open any of the electrical parts or insert
any kind of object into them.
Protect the product from sharp edges, mechanical
loads and hot surfaces.
The light chain may only be fastened threw its
suspension eyes 5 . Fastening at other parts
may damage the insulation and lead to life
dangerous contact voltages.
Always remove the mains plug from the socket
before installing, dismantling or cleaning.
Never touch the light chain plug or the light
chain itself with wet hands.
CAUTION! RISK OF OVERHEATING!
Do not operate the product whilst it is still in the
packaging.
After use store the product in the original pack-
aging to avoid causing unintentional damage.