Melinera Z31602-BS - Manual (Page 5)

5 GB/IE
Use the product outdoors only when connected
to a mains socket protected by a residual-
current device (RCD) with a rated trip current
of not more than 30 mA.
Outdoor mains sockets must be suitable for use
outdoors and should be at least 2.5 m from the
nearest water container or body of water.
The product is protected against splash water
(IP44). This protection standard is only possible
if the mains socket also fulfills requirements of
at least the same protection class.
If you have any questions about the product or
are unsure about any of its aspects, please seek
the advice of an electrical equipment specialist.
Installation
Install the LED Light arch by hanging it onto the
suspension eyes 5 .
The enclosed suction cups 3 are intended for
fastening onto flat and smooth surfaces.
With the enclosed cable ties 4 also a fastening
of the suspension eyes to other objects is possible.
During installation take care, not to twist the
connecting straps 1 . Ensure that the bending
radius of the connecting straps does not fall be-
low 2 cm.
Use
Plug the mains plug 2 into the socket. The
lighting is switched on.
To turn the lighting off, remove the mains plug 2
from the socket.
Cleaning and care
CAUTION! RISK OF ELECTRIC SHOCK!
First remove the mains plug from the socket.
Let the product cool before you clean it. Risk of
injury!
Do not use any solvents, petrol or similar items.
This would damage the device.
Only a dry, lint-free cloth should be used for
cleaning.
Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
EMC