Melinera Z30233A-BS/Z30233B-BS - Manual (Page 7)

9 GB/IE/CY Melinera ®
Safety information / Operation
J  Disconnect the light set from the mains supply if you do not
intend to use the product for a long period.
J  If you have any questions about the product or are unsure
about any of its aspects, please seek the advice of an electrical
equipment specialist.
Q 
Operation
Q 
Using the light set
m CAUTION! The bulbs 6 may become loose during transport.
Before use, check that all the bulbs 6 are seated correctly in their
fittings 8 .
Note: When a bulb 6 is defective, the rest of the bulbs 6 will
not continue to illuminate. It is recommended that any defective
bulbs
6 are replaced immediately by new bulbs. To do this
check each bulb 6 in the series.
j  Place the LED light set 1 in the desired location (e.g. Christmas
tree).
Note: Ensure that the LED light set
1 is held in place by
means of the supplied attachment clips 5 only.
j  Insert the mains plug 4 into a suitable mains socket. The light
set is switched on.
j  Pull the mains plug 4 out of the mains socket to switch off the
product.
66410_BS_mel_LED-Lichterkette_Content_LB6.indd 9 05.05.11 12:41