Melinera 105208-14-0х - Manual (Page 12)

12 GB/IE
Maintenance and Cleaning
The LED cannot be replaced. The solar lamp is maintenance-free,
except for any necessary change of battery.
Clean the solar lamp regularly with a dry, non-fluffing cloth.
Use a slightly moist cloth to remove any stubborn dirt.
Troubleshooting
Note: the device contains sensitive electronic components. For this
reason it is possible that it can be disrupted by radio transmitting
equipment in the immediate vicinity. If you notice that the device is
malfunctioning, remove any sources of interference from the area of
the device.
Notice: Electrostatic discharge can lead to malfunctions. In the event of
such malfunctions briefly remove and reinsert the rechargeable batteries.
Fault Cause Solution
The light will not switch
on even though the
sun shone on the lamp
all day. Artificial sources of
light, e.g. street ligh-
ting, interfere with
the lamp. Mount the lamp in a
place where it cannot
be disturbed by other
sources of light.
The light does not
come on or comes
on only briefly. The rechargeable
battery is broken or
there was not
enough daylight. Replace the recharge-
able battery or mount
the lamp in a place
where it can receive
more sunlight.
105208_LED-Solarleuchte-2in1_content_IE_BE.indd 12 04.11.14 09:13