Important safeguards, Warning save these instructions, General information – Eureka 410 User Manual

Page 2: How to assemble

Advertising
background image

DO NOT OIL the motor or the brush roll. The motor
and brush roll are permanently sealed and
lubricated.

To reduce the risk of fire, electric shock, or injury:

Do not use outdoors or on wet surfaces.
• Do not leave vacuum cleaner when plugged in. Turn

off the switch and unplug the electrical cord when not in
use and before servicing.

Do not allow to be used as a toy. Close attention is

necessary when used by or near children.

Use only as described in this manual. Use only

manufacturer’s recommended attachments.

Do not use with damaged cord or plug. If vacuum cleaner

is not working as it should, has been dropped, damaged,
left outdoors, or dropped into water, return it to a service
center before using.

Do not pull or carry by cord, use cord as a handle, close

door on cord, or pull cord around sharp edges or corners.
Do not run vacuum cleaner over cord. Keep cord away
from heated surfaces.

Do not use extension cords or outlets with inadequate

current carrying capacity.

Turn off all controls before unplugging.
Do not unplug by pulling on cord. To unplug, grasp the

plug, not the cord.

2

Do not handle plug or vacuum cleaner with wet hands.
Do not put any object into openings. Do not use with any

opening blocked; keep free of dust, lint, hair, and anything
that may reduce airflow.

This vacuum cleaner creates suction and contains a

revolving brush roll. Keep hair, loose clothing, fingers, and
all parts of body away from openings and moving parts.

Do not pick up anything that is burning or smoking, such

as cigarettes, matches, or hot ashes.

Do not use without dust bag in place.
Belt pulleys can become hot during normal use. To prevent

burns, avoid touching the belt pulley when servicing the
drive belt.

Use extra care when cleaning on stairs.
Do not use to pick up flammable or combustible liquids

such as gasoline, or use in areas where they may be
present.

Store your cleaner indoors in a cool, dry area.
Keep your work area well lighted.
Unplug electrical appliances before vacuuming them.

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.

WARNING

SAVE THESE INSTRUCTIONS

To reduce the risk of electric shock, this appliance has a
polarized plug (one blade is wider than the other). This plug
will fit in a polarized outlet only one way. If the plug does not fit
fully into the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper outlet. Do not change
the plug in any way.

GENERAL INFORMATION

Use the cleaner to pick up dirt and dust particles. Avoid picking
up hard or sharp objects that could damage the vacuum
cleaner.

Service Information

The instructions in this booklet serve as a guide to routine
maintenance. For additional service information, telephone
our toll free number for the nearest Eureka Authorized
Warranty Station. You should know the model, type and
serial number or date code when you call:

USA: 1-800-282-2886 Mexico: 5670-6169

Canada: 1-800-282-2886

If you prefer, you can write to The Eureka Company, Service
Division, 807 North Main St., Bloomington, Illinois 61701, USA.
In Canada, write to The Eureka Company, 866 Langs Drive,
Cambridge, Ontario N3H 2N7. Refer to The Eureka Warranty
for complete service information.

To assemble the cleaner, find the powerhead (a) and the body
(b). Align the connector on the powerhead with the receptacle
on the body and press together until they click into place.

a

b

HOW TO ASSEMBLE

Advertising