Portable toilet introduction, Intended use, Scope of delivery – Rocktrail Portable Toilet User Manual

Page 7: Parts description, Preparing for use, Draining

Advertising
background image

7

GB

Portable Toilet

Introduction

Congratulations! You have purchased a
high-quality product. The instructions for
use are to be considered as part of this

product. They contain important instructions for use.
Please read all the information carefully before use.
Sanitary to use and high quality in materials and
fabrication, our camping toilets are durable, user-
and maintenance friendly.
For optimal functionality we recommend using
LaPLAYA

®

sanitary liquids. For more information

please visit www.ipv-service.de.

Intended use

Portable toilet for camping, the garden, boat or
wherever sanitary equipment is missing. This prod-
uct is solely intended for private use.

Scope of delivery

1 Camping toilet
1 Instructions for use
1 Starter kit LaPLAYA

®

fresh water and sewage

additive (150 ml each)

Parts description

1

Cover

2

Pump

3

Fresh water reservoir 15 l

4

Locking hook

5

Slide valve

6

Wastewater tank valve

7

Wastewater tank 20 l

8

Toilet paper holder

(

Note: The toilet paper holder is only suitable

for rolls with a diameter of approx. 10 cm.)

9

Screw plug sewage tank (blue)

10

Screw plug freshwater tank (red)

11

Seat

Preparing for use

Separate the two tanks by removing the side

locking hooks (see Fig. A and B).

Fill the top freshwater tank

3

with water (max.

13 l) and add the respective amount of
LaPLAYA

®

freshwater additive (starter set con-

tents =150 ml, corresponds to one tank) (see
Fig. C).

Add about 3 l of water to wastewater tank

7

to cover the bottom of the wastewater tank
with liquid.

Add the respective amount of LaPLAYA

®

waste-

water additive (contents of starter kit =150 ml,
corresponds to one tank) into lower wastewater
tank

7

(see Fig. D).

Reconnect the two tanks by hooking in the lock-

ing hooks at the side.

Use

Open and close the slide valve

5

between

the two tanks once with the cover

1

closed to

release excess pressure from the wastewater
tank

7

which may build due to excess temper-

atures and / or altitudes (see Fig. E).

You may now use the toilet.

Open the slide before using the toilet, then

flush with the pump

2

and again close the

slide. For effective flushing quickly activate the
pump several times (see Fig. F).

Note: When using the toilet in low temperatures,
e.g. whilst winter camping, it‘s advisable to add anti-
freeze or ethylene glycol to the freshwater tank

3

.

Draining

The wastewater tank should be drained no later
than when the contents of the wastewater tank

7

are halfway to the blue screw plug

9

at the back

(approx. 15 l). But for sanitary reasons it‘s advisable
to drain the toilet more often.

Verify the slide valve

5

is fully closed, then

disconnect the two tanks. You may now drain
the wastewater tank

7

in a standard toilet or

a designated wastewater disposal facility (see
Fig. G and H).

After draining and before reassembling the toilet

verify the slide valve

5

and the joining surfaces

of the two tanks are clean, and clean if necessary.

Advertising