Epson EB X6 - Manual (Page 10)

Part Names and Functions 10
Control Panel (EB-S6 only)
Name Function
A
[t] button Turns the projector power on or off. s Quick
Start Guide
B
Status indicators The color of the indicators and whether they
are flashing or lit indicates the status of the
projector. s
p.51
C
[Source Search]
button Changes to the next input source that is
connected to the projector and is sending an
image. s
p.17
D
[Enter] button If pressed during projection of computer signal
images, it automatically adjusts the tracking,
synchronization, and position to project the
optimum image.
When a configuration menu or a help screen is
displayed, it accepts and enters the current
selection and moves to the next level. s
p.39
H
C F E D
A
B
G I
E
[v] [w] buttons Corrects keystone distortion.
If pressed when a configuration menu or a help
screen is displayed, these buttons select menu
items and setting values.
s
Quick Start Guide, p.39
F
[Help] button Displays and closes the help screen which
shows you how to deal with problems if they
occur. s
p.49
G
[Esc] button Stops the current function.
If pressed when a configuration menu is
displayed, it moves to the previous menu level.
s
p.39
H
[Wide] [Tele]
buttons Press to adjust Tele/Wide. Press [Tele] to
make the projected image size smaller, and
press [Wide] to make it larger.
If pressed when a configuration menu or a help
screen is displayed, these buttons select menu
items and setting values.
s
Quick Start Guide, p.39
I
[Menu] button Displays and closes the configuration menu.
s
p.39
Name Function