Epson Stylus NX300 - Manual (Page 21)

Sending a Fax 21
3. Do one of the following to dial the fax number:
■ Use the numeric keypad to manually enter the fax number. You can enter
up to 64 digits.
■ Press Redial/Pause to redial the last fax number you used. The last fax
number is displayed on the screen.
■ Press Speed Dial/Group Dial/Backspace
to select a speed dial/group dial entry. Select
or type the number of the speed dial/group
dial entry you want to use, then press
OK .
You see the screen at right. Press 1 to enter another number, press 2 to
continue with the selection made.
■ Press a one-touch dial button to select one of the first five speed dial/
group dial entries, then press
OK . Press 1 to enter another number, press 2
to continue with the selection made.
■ If you’ve connected a telephone to the
NX300 Series, dial the number from the
phone. You see the screen at right. Press
1
to confirm.
Note:
Don’t hang up the phone until you begin transmitting the fax in step 5.
4. To change any of the following fax settings, press Menu :
■ Resolution to increase the scanning resolution of a faxed document.
■ Contrast to change the contrast of the faxed document.
■ Send Fax Later to specify a different time to send your fax. (You cannot
send another fax until the delayed fax has been sent or cancelled.)
■ Fax Mode to select Sending or Poll to Receive mode to receive a fax
from another fax machine to which you have dialed (such as a fax
information service).
Press Menu when you’re done selecting settings.
5. Press the x B&W or x Color button to send your fax. To cancel faxing, press
y Stop/Clear Settings at any time.
Note:
If the recipient’s fax machine prints only in black and white, your fax is automatically
sent in black and white even if you select color.
NX300_QG.book Page 21 Wednesday, May 7, 2008 10:42 AM