Sealey GSA232 - Manual (Page 3)

5. MAintEnAncE
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMPortAnt: No liability is accepted for incorrect use of this product .
WArrAntY: Guarantee is 12 months from purchase date, proof of which will be required for any claim .
inForMAtion: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode .
01284 757500
01284 703534 sales@sealey .co .uk
Sole uK distributor, Sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St . Edmunds, Suffolk,
IP32 7AR
www .sealey .co .uk
Web
email
Original Language Version
GSA232 Issue: 1 - 03/06/13
p
WArninG! Disconnect drill from the air supply before changing accessories, servicing or
performing maintenance . Replace or repair damaged parts . Use genuine parts only.
Non-authorised parts may be dangerous and will invalidate the warranty.
5.1. Lubricate the air drill daily with a few drops of Sealey air tool oil dripped into the air inlet to
prolong its life .
5.2. Clean the drill after use .
5.3. Loss of power or erratic action may be due to the following:
a) Excessive drain on the air line . Moisture or restriction in the air pipe . Incorrect size or
type of hose connectors . To remedy check the air supply and follow instructions in
Section 3 .
b) Grit or gum deposits in the drill may also reduce performance . If your model has an air
strainer (located in the area of the air inlet), remove the strainer and clean it . Flush the
drill out with gum solvent oil or an equal mixture of SAE No 10 oil and paraffin .
Allow to dry before use .
5.4. For a full service contact your local Sealey service agent .
5.5. When not in use, disconnect from air supply, clean drill and store in a safe, dry, childproof
location .
Environmental Protection.
Recycle unwanted materials instead of disposing of them as waste .
All tools, accessories and packaging should be sorted, taken to a recycle centre
and disposed of in a manner which is compatible with the environment .
Parts support is available for this product. to obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.
© Jack Sealey Limited 2013