Sealey SA608 - Manual

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE OR PERSONAL INJURY AND WILL INVALIDATE THE
WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
3
Follow all workshop safety rules, regulations, and conditions when using wrench.
p WARNING! Disconnect from air supply before changing accessories or servicing.
3
Maintain the wrench in good condition and replace any damaged or worn parts. Use
genuine parts only. Non-authorised parts may be dangerous and will invalidate the warranty.
p
WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.
3 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each
use and ensure that all connections are secure.
3
Only use impact sockets which are specifically designed for use with a ratchet wrench.
3
Wear approved safety eye/face shield, ear defenders, and hand protection.
3 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
3
Keep children and non essential persons away from the working area.
7 DO NOT use the wrench for a task it is not designed to perform.
p WARNING! DO NOT use wrench if damaged or thought to be faulty. (Contact Service Agent).
7
DO NOT use wrench unless you have been instructed in its use by a qualified person.
7 DO NOT expose the comfort grip to excessive heat.
7
DO NOT carry the wrench by the air hose, or yank the hose from the air supply.
7 DO NOT operate wrench if you are tired, under the influence of alcohol, drugs or intoxicating
medication.
7
DO NOT carry wrench with your hand on the power trigger in order to avoid unintentional starting.
7
DO NOT direct air from the air hose at yourself or others.
3 When not in use disconnect from air supply and store in a safe, dry, childproof location.
INSTRUCTIONS FOR:
AIR RATCHET WRENCH
MODEL No’s:
SA607.V2, SA608.V2
2. INTRODUCTION & SPECIFICATIONS
MODEL No: . . . . . . . . . . . . . . . SA607.V2
Drive size . . . . . . . . . . . . . . . . . . . . 3/8”Sq
Max torque . . . . . . . . . . . . . . . . . . . .50lb.ft
Air consumption . . . . . . . . . . . . . . . . 4cfm
Operating pressure. . . . . . . . . . . . . . 90psi
Air inlet size . . . . . . . . . . . . . . . . . 1/4”BSP
Weight . . . . . . . . . . . . . . . . . . . . . . . 1.3kg
Noise Power . . . . . . . . . . . . . . . . . 102dBA
Noise Pressure. . . . . . . . . . . . . . . . 91dBA
MODEL No: . . . . . . . . . . . . . . . SA608.V2
Drive size . . . . . . . . . . . . . . . . . . . .1/2” Sq
Max torque . . . . . . . . . . . . . . . . . . . .50lb.ft
Air consumption . . . . . . . . . . . . . . . . 4cfm
Operating pressure. . . . . . . . . . . . . . 90psi
Air inlet size . . . . . . . . . . . . . . . . . 1/4”BSP
Weight . . . . . . . . . . . . . . . . . . . . . . . 1.3kg
Noise Power . . . . . . . . . . . . . . . . . 102dBA
Noise Pressure. . . . . . . . . . . . . . . . 91dBA
Composite cover moulded around lightweight aluminium alloy housing reduces effects of chill on
operator’s hands and provides added control. Air motor with quality bearings for smooth and powerful
operation. Exhaust outlet adjusts 360° keeping air flow away from operator. Features twist reverse action
and trigger operated power control. Hardened gear and yoke assembly ensures suitability for the
professional workshop.
Original Language Version SA607.V2, SA608.V2 Issue: 2(SP) - 18/12/13 © Jack Sealey Limited