Maintenance – Sealey S01004 User Manual
Page 3
5.3. DO NOT use worn or damaged sockets.
5.4. Loss of power or erratic action may be due to the following:
a) Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect size or
type of hose connectors. to remedy check the air supply and follow instructions in
chapter 3.
b) Grit or gum deposits in the wrench may also reduce performance. If your model has an
air strainer (located in the area of the air inlet), remove the strainer and clean it. Flush
the wrench out with gum solvent oil or an equal mixture of SAE no 10 oil and paraffin.
Allow to dry before use.
5.5. For a full service, contact your local Sealey service agent.
5.6. When not in use, disconnect from the air supply, clean wrench and store it in a safe, dry,
childproof location.
Original Language Version
S01004 Issue: 1 - 22/03/13
© Jack Sealey Limited
WARNING! Disconnect the wrench from the air supply before changing accessories,
servicing or performing any maintenance. replace or repair damaged parts. Use genuine
parts only. Non-authorised parts may be dangerous and will invalidate the warranty.
5.1. Lubricate the air wrench daily with a few drops of Sealey air tool oil (Sealey ref: AtO500S)
dripped into the air inlet.
5.2. Clean the wrench after use.
5. MAINTENANCE
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 6 months from purchase date, proof of which will be required for any claim. INFORMATION: For a copy of our latest
catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7Ar
www.sealey.co.uk
Web
Environmental Protection.
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycle centre and disposed of in a manner which is
compatible with the environment.
Parts support is available for this product. to obtain a parts listing and/or diagram, please log on to:
www.sealey.co.uk, email: [email protected] or phone:01284 757500.