Eureka 5550 - Manual (Page 6)

5. You will find your cord retainer on the handle
above the upper cord hook. Firmly push the
electrical cord down into the cord retainer. This
will place the cord out of the way the next time
you vacuum.
6. Next wind the cord around the two cord hooks
on the back of the cleaner.
7. Secure the plug to the cord to prevent
unwinding.
Cord
Retainer
6
Cord
Hook
Step E Store Electrical Cord
Step D Store Accessories
Crevice
Tool
Cord
Hook
5
6
6
Nesting
Extension
Wands
(shipped
stored on
cleaner)
Dusting/
Upholstery
Brush
Step C Replace Dust Cup
4. Replace dust cup by aligning front of the bottom
of dust cup into groove on cleaner. Pivot dust cup
up against cleaner and rotate the dust cup latch
to the right to secure.
Dust Cup
Latch
Groove