Sealey AK48 User Manual

Fig.1 fig.2

Advertising
background image

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL

REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE

PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY

AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

INSTRUCTIONS FOR:

2-WAY OPERATING GREASE GUN

3-WAY FILL HEAVY DUTY

MODEL No:

AK48

r

WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this equipment.

3

Familiarise yourself with the application and the limitations of the grease gun, as well as the potential hazards.

3

Keep the work area clean, uncluttered and ensure there is adequate lighting.

3

Keep the grease gun clean for best and safest performance.

3

Check moving parts alignment on a regular basis.

7

DO NOT use the grease gun for any purpose other than that it was designed for.

7

DO NOT operate the grease gun if any parts are damaged or missing, as this may cause failure and/or personal injury.

3

When not in use store in a safe, dry, childproof location.

r

WARNING! Always wear approved eye protection when operating the grease gun.

1. SAFETY INSTRUCTIONS

2. INTRODUCTION & SPECIFICATION

Original Language Version

© Jack Sealey Limited

Highly durable die-cast aluminium alloy pump head. Features 3 way fill with cartridge, bulk or manual capability. Fitted with 2 way operating extend-

able handle; pistol type, ideal for use in confined spaces and lever type, providing high pressure and volume. Supplied with rigid delivery tube, push

on hydraulic 4 jaw coupling and 300mm flexible delivery tube. Rubber gripped grease tube and handle for easy grip. Features variable stroke for

controlled grease volume; half stroke gives low pressure/low volume, full stroke provides high pressure/high volume delivery. Accepts standard 400g

cartridges.

AK48 Issue No.1 - 26/09/13

Fig.1

Fig.2

Advertising