Epson 400 Series - Manual (Page 41)

Making Detailed Adjustments
41
Saving and Resetting Menu Selections
Once you’ve adjusted the picture settings, you can save them as a group using the Memory
feature. This lets you easily recall them, and switch from one group of settings to another.
If necessary, you can use the projector’s reset options to restore its factory-default settings.
You can clear all the settings, or just the settings in a specific menu.
Creating Memory Settings
After adjusting the picture to your liking, you can save your settings as a group in the
projector’s memory. This stores the Brightness and Contrast settings, White Level, Black
Level, Color Mode, and other color settings described on pages 38 and 39.
1. Press the Menu button on the remote control.
2. Open the Memory menu, then select Save Memory .
3. Select the memory name you want to use (from Memory1 to Memory9), then press the
Select button to save your settings.
Note: Saved settings are indicated by a green highlight next to the memory name. If you select
a name that is already in use, the existing settings will be erased and new ones saved in their
place.
Recalling Memory Settings
Once you have created one or more memory settings, you
can easily recall them:
1. Press the Memory button on the remote control.
2. Use the arrow buttons to select the desired setting, then
press the Select button.
After a moment, the image appears on the screen using
your selected setting.
Memory
button
PowerLite Cinema 400.book Page 41 Friday, July 7, 2006 2:24 PM