EPoX Computer KP6-FX2 - Manual (Page 9)

9
Introduction 1-3
• KP6-FX 2 is based on the Pentium ® II Processor operating at 233 ~ 300 MHz on
slot 1. The board is configured by an Easy-Setting-Single-Jumper (ESSJ) to
match your CPU clock speed.
• Designed with Intel’s 82440 FX PCIset
• Supports upto 1 GigaByte of DRAM (minimum of 8 MB) on board, You can use
either 72-Pin SIMM x 4 or 168-Pin DIMM x 2 or both. It will automatically
detect Fast Page Mode (FPM) DRAM or Extended Data Output (EDO) DRAM
(please see page 2-7).
• KP6-FX 2 will support Error Checking and Correcting (ECC) when using parity
DRAM modules. This will detect multiple bit errors and correct 1-bit memory
errors.
• Supports (3) 16 bit ISA slots, (5) 32 bit PCI slots, and provides (2) independent
high performance PCI IDE interfaces capable of supporting PIO Mode 3 and
Mode 4 devices. The KP6-FX 2 supports (4) PCI Bus Master slots and a
jumperless PCI INT# control scheme which reduces configuration confusion
when plugging in PCI card(s).
• Supports ATAPI (e.g. CD-ROM) devices on both Primary and Secondary IDE
interfaces.
• Designed with SMC 37C932FR Multi I/O: (1) floppy port, (1) parallel port
(EPP, ECP), and (2) serial ports (16550 Fast UART).
Note: Japanese “Floppy 3 mode” is also supported
• Includes a PS/2 mouse connector.
• Allows use of a PS/2 or AT keyboard.
• Features Award Plug & Play BIOS. With Flash Memory you can always upgrade
to the current BIOS as they are released.
• Supports CPU Hardware sleep and SMM (System Management Mode).
• KP6-FX 2 utilizes a Lithium battery which provides environmental protection and
longer battery life.
• Supports the Universal Serial Bus (USB) connector. The onboard PIIX chip
provides the means for connecting PC peripherals such as monitors, keyboards,
joysticks, telephones, and modems.
• Supports ATX 20 pin power supply connector.
• Supports Remote On/Off when used with ATX power supplies.
• Four Layer design technology and full ATX form factor.
(12” x 9.6”, 305mm X 244mm)
• Supports ring-in feature (remote power-on through external modem), allows
system to be turned on remotely.
• Supports Desktop Management Interface (DMI) facilitating the management of
desktop computers, hardware and software components and peripherals, whether
they are standalone systems or linked into networks. (option)
1-2 KP6-FX 2 Specification