Livarno Z30598 - Manual (Page 3)

3 GB
Introduction
Shelving unit
Q Introduction
Please familiarise yourself with the product
prior to assembly. Carefully read the
following assembly instructions and safety
tips. Only use the product as described and for the
specified applications. Store these instructions in a
safe place. If passing this product on to a third party
also include all documents.
Q Intended use
The shelving unit is intended for the keeping of small
and lightweight objects in interior domestic environ-
ment. Any use other than the aforementioned or any
product modification is prohibited and can lead to
injuries and / or product damage. The manufacturer
is not liable for any damages caused by any use
other than its intended purpose. This product is not
intended for commercial use.
Q Description of parts
1 Back (right)
2 Back (left)
3 Top / middle shelves (right)
4 Top / middle shelves (left)
5 Central separating panel (long)
6 Intermediate shelf
7 Central separating panel (short)
8 Bottom shelves
9 Glass shelves
10 Outside support (left)
11 Outside support (right)
12 Connecting rod
13 Double dowel
14 Screw dowel
15 Cam connector
16 Wooden dowel
17 Screw cap
18 Phillips screw (approx. ø 4 x 10 mm)
19 Foot
20 Phillips screw (approx. ø 6 x 50 mm)
21 Phillips screw (approx. ø 5 x 42 mm)
22 Glass shelf holder
23 Phillips screw (approx. ø 4 x 12 mm)
24 Phillips screw (approx. ø 5 x 40 mm)
25 Dowel
26 Phillips screw (approx. ø 6 x 25 mm)
27 Cross-thread bolt
28 Screw driver
Q Includes
Immediately after unpacking please check the
package contents for completeness and if all parts
and the product are in good condition. Do not
assemble the product if the package contents are
incomplete.
1 Back (right)
1 Back (left)
2 Top / middle shelves (right)
2 Top / middle shelves (left)
1 Central separating panel (long)
1 Intermediate shelf
1 Central separating panel (short)
1 Bottom shelves
3 Glass shelves
1 Outside support (left)
1 Outside support (right)
3 Connecting rods
5 Double dowel
10 Screw dowel
20 Cam connectors
4 Wooden dowels
4 Screw caps
3 Phillips screws (approx. ø 4 x 10 mm)
2 Feet
23 Phillips screws (approx. ø 6 x 50 mm)
9 Phillips screws (approx. ø 5 x 42 mm)
12 Glass shelf holders
9 Phillips screws (approx. ø 4 x 12 mm)
4 Phillips screws (approx. ø 5 x 40 mm)
4 Dowels
2 Phillips screws (approx. ø 6 x 25 mm)
23 Cross-thread bolts
1 Screw driver
1 Assembly instruction