Livarno Z30598 - Manual (Page 4)

4 GB
Introduction / Safety information / Assembly
Q Technical specifications
Dimensions: approx. 80 x 180 x 30 cm
(W x H x D)
Material: MDF boards, powder-coated
metal and glass
Thickness of the
MDF boards:
15 mm
Maximum load: 5 kg per shelf
Safety information
PLEASE READ THE ASSEMBLY INSTRUCTIONS
BEFORE USE! PLEASE KEEP THE ASSEMBLY IN-
STRUCTIONS IN A SAFE PLACE!
J WarnIng! rISK OF LIFE
anD aCCIDEnTS FOr InFanTS
anD CHILDrEn! Never leave
children unattended with the packaging material.
Risk of suffocation. Keep children away from
the product. The product is not a toy.
CaUTIOn! rISK OF InJUrY! Ensure all
parts are undamaged and correctly assembled.
Incorrect assembly poses the risk of injury.
Damaged parts may affect safety and function.
CaUTIOn! Do not leave children without
supervision! The product is not a climbing frame
or toy! Make sure that nobody stands or pulls
themselves up on the product; this applies par-
ticularly to children. The product may fall over.
This can result in injury and / or damage to
property.
J CaUTIOn! rISK OF FIrE! Do
not position the product near open
flames or radiant fires.
J Regularly check the stability of all connections
and retighten the screws.
J Make sure that the product is standing on a
solid, even surface.
J Make sure that all connections are fitted together
securely and check all joints for stability.
CaUTIOn! Do not lift or move the product if
it is supporting any object.
J
kg
Ensure that the total load on the
product does not exceed 50 kg and
the load on any shelf does not exceed
5 kg. Failure to observe this advice could result
in injury and / or damage to property.
J Do not move the product if there are objects on
the shelves.
J The product must be evenly loaded in such a way
that it cannot tip over. Check that the product is
stable before using it.
J Keep the product away from water and moisture.
Damage to property may otherwise occur.
J Do not lean against the product. Ensure that the
supported weight is evenly distributed on the
shelves. Failure to observe this advice may result
in the product falling over.
WarnIng! rISK OF LOSS OF LIFE
FrOM ELECTrIC SHOCK! Before installation
please ensure that there is no concealed wiring
where you are intending to drill.
CaUTIOn! rISK OF WaTEr DaMagE!
Before installation please ensure that there are
no concealed water pipes where you are inten-
ding to drill.
J Check before fastening the product to the wall
whether the wall is suitable for the product to be
fastened to it. If necessary seek advice from your
local DIY supplier or a construction professional.
J Examine the wall before installation and choose
suitable installation fixings. We have supplied fi-
xings suitable for an ordinary solid masonry wall.
J Always start loading commencing with the lowest
shelf first and continue shelf by shelf upwards.
Always place the heaviest items on the bottom
shelves.
Q assembly
note: Assemble the product on a scratch-resistant
floor that is sufficiently large for the purpose. You may
have to cover the floor in order to avoid making any
scratches.
note: For assembly you require a Phillips screwdriver,
a hammer and an electric drill.
CaUTIOn! rISK OF InJUrY! Refer to the
operating instructions for your electric drill.
note: Check regularly that all the threaded connec-
tions are tight and retighten all the screws if necessary.