Epson GT-10000 - Manual (Page 4)

EPSON GT-10000+
3/01 EPSON GT-10000+ - 3
Electrical
standard:
ANSI X3T9.2/375R Revision 10L
(SCSI 2)
ID setting: Selectable from 0 to 7 (factory setting: 2)
Terminator: Internal terminator selectable (enable/
disable)
Connector type: Two half-pitch (high density), 50-pin
connectors
Connector pin arrangement:
Initialization methods
Scanner is turned on or receives a SCSI Reset signal from the
SCSI interface (hardware initialization).
Scanner receives a SCSI Bus Device message or an Esc @
command from the software (software initialization).
Configuration
System Requirements
IBM compatible PC with Pentium equivalent or higher
processor, 64 MB RAM recommended
SCSI: ASPI-compliant compatible Fast SCSI,
Ultra or Ultra 2 SCSI PCI card
IEEE 1394: IEEE 1394 port equipped PC systems or
PCI IEEE 1394 card (OHCI compliant)
with Windows 2000 or Me
Operating Systems Supported
Windows 95, 98, 2000, Me, or NT 4.0 (with SP4)
Software Included
EPSON TWAIN Pro Scanner Driver, version 2.0
EPSON TWAIN Pro Network Scanner Driver, version 2.0
EPSON Scan Server, version 1.21E
Pixel Translations ISIS Driver, version 1.4.10101.04003
Adobe PhotoDeluxe Business Edition, version 1.0
Xerox TextBridge Pro OCR, version 8.0
NewSoft Presto! PageManager, version 4.20.09
Optional Automatic Document Feeder
(B813212) Specifications
General
Paper input/
output:
Load face-up; eject face-down
Paper quantity: 100 pages (80 g/m
2
paper, maximum
total thickness under 0.48 inches
[12 mm])
100,000 sheets (load/eject MCBF)
Speed: 10 ppm (monochrome, draft mode at
200 dpi)
Dimensions: Width: 23.8 inches (606 mm)
Depth: 19.2 inches (488 mm)
Height: 5.3 inches (134 mm)
Weight: Approximately 28.7 lb (13 kg)
Electrical
Input voltage: 22.8 to 25.2 VDC
4.75 to 5.25 VDC
Input current: 24 V: 1.5 A
5 V: 0.4 A
Optional IEEE 1394 Scanner Interface
Card (B808342) Specifications
General
Interface type: IEEE 1394-1995 compatible
Data transfer
method:
Half-duplex Data/Strobe differential serial
Synchronization
method:
Clock synchronization with DS-Link
Encoding/
decoding:
DS-Link
Logic level: 3.3 V
Compatible
connectors:
IEEE 1394-1995 compatible
Power class: Power class code 100
No power supply from external
sources
Fitted with a repeat function with bus
power
25
50
1
26