Silvercrest WIRELESS SOCKET SET - Manual (Page 36)

36 GB
Introduction
Outdoor Wireless
Socket Set
Introduction
Intended use
The remote controlled socket set is suita-
ble for the remote switching on and off
of electrical appliances and lamps. The
remote control socket set is suitable for
outdoor use. This device may only be
used individually. Do not have one re-
mote controlled socket inserted behind
another. Any modification to the appli-
ance shall be considered as improper
use and could lead to considerable risk
of accident. The manufacturer will not
accept liability for loss or damage
arising from improper use. This device is
not intended for commercial use.
Scope of delivery
Please check after unpacking that this
set is complete.
2 Remote controlled sockets IP44
1 4-channel remote control
2 AAA batteries 1.5 V
1 Set of operating instructions
Control elements
Remote Control (fig. A/B):
1 Remote control unit
2 Power indicator light
3 Channel OFF button
Channel A, B, C, D, E
4 Channel ON button
Channel A, B, C, D, E
5 Battery compartment cover
6 DIP switch
Remote controlled socket
(fig. C/D):
7 Remote controlled socket
8 Earthed wall socket IP44 with flap
lid and child protection
9 Safety plug
10 DIP switch
11 Cover (DIP switch compartment)
12 Screws
Technical Data
Remote control
Classification:
RCS AAA1000-A
IP44
Battery: 2 x AAA, 1.5 V
Transmission
frequency:
433.92 MHz
Certification: The system has a
general certifica-
tion (BZT) and is
subscription free
and non-billable.
Range: depends on the
environmental
conditions, ap-
prox. 40 m in
optimal conditions