Before fi rst use, Charging the appliance, Assembly/disassembly – Silvercrest SHSS 12 B2 User Manual

Page 39

Advertising
background image

36

SHSS 12 B2

GB
MT

Before fi rst use

NOTE

►

This appliance is supplied with non-charged
batteries. The batteries must be charged for
6 hours before the fi rst use.

■

Remove all packaging materials as well as foils
and stickers

Charging the appliance

NOTE

►

Ensure that the appliance is switched off
before starting to charge the batteries.

■

To charge the appliance, connect the charger i
to a mains socket and insert the barrel jack o
into the charging socket s on the cradle d.
Feed the cable through the cable channel on the
charging socket s, so that the cradle d is not
resting on the cable.

■

Place the handle with the attached hand element
4 onto the cradle d.
The red control lamp 3 illuminates.
When the appliance is fully charged, the indicator
light 3 illuminates green.

Assembly/disassembly

Connecting the hand element to the
handle/removal from handle

Fig. 1

Fig. 2

■

To connect the hand element 4 to the handle,
push the tip of the hand element 4 into the
opening in the hand element recess e.

■

Then press the grip 1 of the hand element 4
into the handle so that the hand element 4
clicks fi rmly into position (Fig. 1).

■

To remove the hand element 4 from the handle,
press the "Hand element" release w.

■

Then pull the hand element 4 upwards and
forwards out of the hand element recess e
(Fig. 2).

IB_100116_SHSS12B2_LB5.indb 36

19.09.14 13:54

Advertising