Silvercrest SKRD 30 A1 - Manual (Page 24)

22
Handling and operation/Cleaning
SKRD 30 A1
GB
IE
CY
Setting the display brightness manually
Press and hold down the Dimmer/AOT ♦ 5 button for at least 2 seconds.
The current setting for the display brightness is shown ( = bright or = dim).
Press and hold down the Dimmer/AOT ♦ 5 button again for at least 2 seconds
to change the setting.
NOTICE
With the setting ► the display 3 lights up for approx. 15 seconds as
soon as any button is pressed. With the setting the display 3 lights up
permanently.
Setting alternative display
Prerequisite: The device is in the radio operational mode.
Press the Alarm1 button ♦ 8 . The current time of day is shown. Now every
5 seconds the indication in the display 3 alternates between the reception
frequency of the set radio station and the time of day.
Press the Alarm1 button ♦ 8 again and the reception frequency of the set
radio station will again be displayed permanently.
Press the Alarm2 button ♦ 9 . The current time of day is shown permanently.
Press the Alarm2 button ♦ 9 again and the reception frequency of the set
radio station will again be displayed permanently.
Cleaning
Safety instructions
DANGER
Life-threatening situation from electric shock!
Remove the plug from the mains power socket before cleaning. ►
IMPORTANT
Damaging of the device!
Make sure when you are cleaning the device that no moisture gets inside ►
in order to avoid irreparable damage to it.
Cleaning the housing
Clean the surfaces of the device with a soft, dry cloth. ■