Silvercrest SHLF 2000 A1 - Manual (Page 6)

4
2. Names of parts
(see fold-out page)
1 Warning symbol - “Do not cover”
2 Control panel
3 Air outlet
4 Compartment for remote control
5 Handle
6 Air inlet
7 Temperature sensor
8 Mains switch
9 Base
10 Display
11 Function selector
12 Increase temperature
13 Reduce temperature
14 Infrared receiver
15 Increase minutes
16 Increase hours
17 Swivel function
18 Indicator light
19 Remote control
20 Increase temperature
21 Swivel function
22 Reduce temperature
23 Function selector
24 Increase minutes
25 Increase hours
3. Technical data
Power supply: 220 - 240 V~/50 Hz
Output: 1,000/2,000 watts
Protection class: II
Battery for remote control: CR2032/3 V
Ambient conditions: 0 °C to +40 °C, max. 85 % relative humidity
4. Safety information
4.1 Terms used
The following signalling terms are found in
these Operating Instructions:
Warning!
High risk. Disregarding the warning
may cause injury to life and limb.
Caution!
Medium risk. Disregarding the warning may
cause damage to property.
Note:
Low risk. Circumstances that should be taken
into account when dealing with this
appliance.
4.2 General information
• Before using the appliance, be sure to
read these Operating Instructions carefully.
They are a component part of the
appliance and must be available at all
times.
• Use the appliance only for the purpose
described (see “1.1 Intended purpose” on
page 3).
• Check whether the mains voltage (see
type plate on the appliance) agrees with
your mains voltage.
• This device is not intended to be used by
individuals (including children) with
RP74284 HL mit FB LB4 Seite 4 Freitag, 25. Mai 2012 5:45 17