Starting up the device, Boiling water – Silvercrest SWKT 3000 A1 User Manual

Page 5

Advertising
background image

- 3 -

• Do not allow individuals (including children) to

use the appliance whose physical, sensorial or
mental abilities or lack of experience and know-
ledge hinder their safe usage of it if they have
not previously been supervised or instructed in its
correct usage.

• Tell children about the appliance and its potenti-

al dangers so that they do not play with it.

Starting Up the Device

• Before starting up the device, make certain that...
– the device, plug and power cable are in good

working order and...

– all packaging materials have been removed

from the device.

• Fill the device with water up to the MAX mark

and let it come to a full boil once as described in
the next section. Pour out this water.

Boiling Water



Danger! Never place the electrical base
near water – life-threatening danger!



Warning: For safety reasons, the lid

q

should not be opened while the water is
boiling or is very hot. Otherwise there is a
risk of injury.

•You should only heat as much water as you need
directly. That helps you save electricity, water and
time:
• Lift away the kettle

u

for filling!

• Open the lid

q

by pressing down on the unlok-

king button

w

.

• Hold the kettle

u

vertically while filling. Only

then will the level indicator

i

on the side

correctly indicate the water volume.

Fill the kettle

u

...

– at least to the MIN mark so that the device does

not overheat,

– no higher than the MAX mark so that no boiling

water spills out.

• First close the lid

q

...

• then place the kettle

u

on the base

t

until it sits

straight on the base

t

.

• Set the temperature controller

y

at the desired

position. To bring the water to a boil, you need
to place the temperature controller

y

in the coo-

king area at the MAX position.

• Now insert the power plug into the power

socket and press the ON/OFF switch

e

down

until it snaps in.

• The operating light

r

indicates that the device is

now heating up.

MIN

MAX

ke

ep

w

ar

m

ran

ge

bo

ilin

g

ra

ng

e

Transition-

range

IB_68892_SWKT3000A1_LB6 26.07.2011 13:42 Uhr Seite 3

Advertising