Silvercrest SSKB 2200 A1 - Manual (Page 10)

7 SSKB 2200 A1
GB
Appliance description
Seat cushion
2 Storage compartment for the battery pack
3 Connector plug of the seat cushion
4 Carrying handle
5 Battery pack
6 Connection socket of battery pack
7 Function button for the temperature levels
8 Function indicator of the battery pack
9 Connector power adaptor
10 Connector plug of the power adapter
Charging the battery pack
The battery pack 5 is charged using the supplied power adapter.
For safe and faultless operation of the appliance after making the electrical
connection, pay heed to the following advice:
TAKE NOTE
► Before connecting the appliance compare the connection data (voltage
and frequency) on the rating plate with that of your mains power supply.
This data must tally so as to avoid damage to the appliance.
► Ensure that the mains power cable is undamaged and is not running over
hot surfaces and/or sharp edges.
► Ensure that the mains power cable is not overtaut or kinked.
► Do not let the power cable hang over edges (trip wire eff ect).
► If you do not intend to use the seat cushion for a long period, disconnect
the battery pack
5 from the connector plug 3 .
♦ Insert the plug of the power adapter 9 into a mains power socket.
♦ Ensure that the battery pack 5 is switched off (function indicator 8 is
not lit up).
♦ Connect the connector plug of the power adapter 10 with the connecting
socket of the battery pack 6 . The function indicator of the battery pack 8
blinks red and the battery pack 5 is now being charged. When the function
indicator of the battery pack 8 glows green, the battery pack 5 is now
fully charged.
NOTICE
► Prior to initial use or after a prolonged period without use, the battery
pack
5 must be charged for about 3 hours.
Buch_77790_LB4.indb 7 Buch_77790_LB4.indb 7 31.07.12 16:23 31.07.12 16:23